Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000002XJJ00AX
Title: DOOR / HATCH: BACK DOOR OPENER SWITCH: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL BACK DOOR OUTSIDE HANDLE

(a) Install the back door outside handle with the 2 bolts.

Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)

(b) Engage the clamp.

(c) Connect the connector.

2. INSTALL BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

4. INSTALL BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

5. INSTALL BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

7. BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

8. INSTALL BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

9. INSTALL POWER BACK DOOR ROD (w/ Power Back Door) DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+